Clear Print PET 4 C
Clear Print PET 4 C films can be printed upon using a UV printing machine. On the other hand, it absorbs more than 95% of all UV-Rays and protects against impacts.
2. High optical quality polyester
3. Reinforced PS Adhesive to accompany the elasticity of the film in case of impact, glass polymerization within 30 days
4. Protection release liner, disposable after installation
Soapy water solution (ref. 600-F0355 Film on), do not clean for at least a month and do not apply any type of sticker or adhesive on the film.
Data calculated based on film applied to clear glass 3 mm thick (*on double glazing 4-16-4)
|Ultraviolet transmission||<1 %|
|Visible light transmission||88 %|
|Reflection of external visible light||7 %|
|Reflection of internal visible light||4 %|
|Total solar energy rejected||16 %|
|Total solar energy rejected 2*||17 %|
|Solar ratio :|
|Solar energy reflection||9 %|
|Solar energy absorption||8 %|
|Solar energy transmission||83 %|
|Reduction in Solar Glare||8 %|
|Heat loss Reduction (Winter)|
|Rejected Infrared (760-2500 nm)|
|Installation type : Interior|
|Colour from the outside : TRANSPARENT|
Vertical installation and on standard glass surface*
|Clear single pane|
|Tinted single pane|
|Reflective tinted single pane|
|Clear double pane|
|Tinted double pane|
|Reflective tinted double pane|
|Gas-filled double pane - Low E|
|STADIP EXT. clear double pane|
|STADIP INT. clear double pane|
|Yes Caution Not recommended|
*Recommendations provided on the basis of a glazed surface covering up to 2.5m².
Non-contractual data, SOLAR SCREEN® reserves the right to modify the composition of its films at any time. Consult our guarantee vouchers and our general conditions of sale.
You have a project?